Silverado 1500 4WD V8-6.2L (2010)
3. To assemble the connector, reverse the connector disassembly procedure.
Terminal Position Assurance Locks
Terminal Position Assurance Locks
The terminal position assurance (TPA) insert resembles the plastic combs used in the control module connectors. The TPA keeps the terminal securely
seated in the connector body. Do not remove the TPA from the connector body unless you remove a terminal for replacement. If the TPA is removed, be
sure to reinstall it before reconnecting the connector.
Tyco/AMP Connectors (Sensor)
Tyco/AMP Connectors (Sensor)
Special Tools
J-38125 Terminal Repair Kit
Terminal Removal Procedure
1. Disconnect the connector from the component.
2. Insert the J 38125-11A tool into the cavity on the lower right hand face of the connector until the terminal release tang access panel slides over.