Silverado 1500 4WD V8-6.2L (2010)
Lifter / Lash Adjuster: Service and Repair
Valve Lifter Oil Manifold Replacement
Valve Lifter Oil Manifold Replacement
Removal Procedure
1. Remove the intake manifold. Refer to Intake Manifold Replacement (Without AFM) (See: Intake Manifold/Service and Repair)Intake Manifold
Replacement (With AFM) (See: Intake Manifold/Service and Repair).
2. Disconnect the engine harness electrical connector (1) from the oil pressure sensor.
3. DO NOT lift the valve lifter oil manifold by the electrical lead frame.