Silverado 1500 4WD V8-6.2L (2010)
Oil Pan: Service and Repair
Oil Pan Cover Replacement
Oil Pan Cover Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle (See: Maintenance/Vehicle Lifting/Service and Repair).
2. Remove the oil pan cover bolts (435), cover (434), and gasket (433). Discard the gasket.
Installation Procedure
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
1. Position a NEW oil pan cover gasket (433) and the cover (434) to the oil pan and install the bolts (435). Tighten the bolts to 12 Nm (106 lb in).
