Silverado 1500 4WD V8-6.2L (2010)
12. Close the axle vent hose clip.
13. Position the fuel tank fill pipe ground wire to the frame bracket.
14. Install the fuel tank fill pipe ground wire anti-rotation tab into the frame hole.
15. Install the fuel tank fill pipe ground wire bolt.
Tighten the bolt to 9 Nm (80 lb in).
16. Lower the vehicle.
17. Install the fuel tank filler housing.
18. Install the fuel tank filler housing to fuel tank fill pipe bolts.
Tighten the screws to 2.3 Nm (20 lb in).
19. Install the fuel tank filler housing to body TORX(R) screws (1) and pushpin retainer (2).