Silverado 1500 4WD V8-6.2L (2010)
3. Install the negative battery cable to the vehicle, if equipped without a battery current sensor.
4. Ensure that the engine harness terminal (3) is position behind the negative battery terminal (2).
5. Position the negative battery cable terminal (2) to the cylinder head.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
6. Install the negative battery cable stud (1) to the front of the right cylinder head and tighten to 25 Nm (18 lb ft).