Silverado 1500 4WD V8-6.2L (2010)
2. Install the battery positive cable retainers (1) to the upper plenum.Install the battery positive cable clip nuts (1) to the studs on the upper plenum.
3. Install the battery positive cable connector (3) to the underhood fuse block.
4. Ensure that the underhood fuse block retainers (2) are in the open position.
5. Position and engage the junction block to the 4 bracket pivots, push the retainers (2) down into the locked position.
6. Install the underhood fuse block cover.
7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery) (See: Negative/Service and
Repair)Battery Negative Cable Disconnection and Connection (Dual Batteries) (See: Negative/Service and Repair)Battery Negative Cable
Disconnection and Connection (Auxiliary Battery) (See: Negative/Service and Repair).
