chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Starter Relay > < Starter Motor|Diagrams|Page 9456
Page 8
background image

Tighten the bolt to 9 Nm (80 lb in).

16. For 2500 series vehicles, install the oil pan skid plate and tighten the rear 2 bolts and install and tighten the front 2 bolts, if equipped.

Tighten the bolts to 28 Nm (21 lb ft).

17. Lower the vehicle.
18. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (Single Battery)   (See: Battery/Battery

Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Dual Batteries)   (See: Battery/Battery
Cable/Negative/Service and Repair)Battery Negative Cable Disconnection and Connection (Auxiliary Battery)   (See: Battery/Battery
Cable/Negative/Service and Repair).

Starter Relay > < Starter Motor|Diagrams|Page 9456