Silverado 1500 4WD V8-6.2L (2010)
Note: DO NOT pull on the steering shaft coupling (1) in order to separate the coupling from the steering gear.
6. Remove the steering shaft coupling bolt (2) at the steering gear.
7. Remove the steering shaft coupling nut (1) and the bolt (2) at the upper intermediate steering shaft.
8. Remove the steering shaft coupling from the vehicle.
Installation Procedure
Note: Failure to transfer the alignment marks may result in an off-center steering wheel after installation.
1. If a new steering shaft coupling is being installed, copy the alignment marks from the old component to the same locations on the new component.
2. Position the steering shaft coupling in the vehicle.