Silverado 1500 4WD V8-6.2L (2010)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension Shock Absorber
Shock Absorber, Shock Absorber Component, or Spring Replacement
Shock Absorber, Shock Absorber Component, or Spring Replacement
Special Tools
CH-48845 Spring Compressor
Removal Procedure
Warning
Use only the CH-48845 Spring Compressor when servicing suspension components on this vehicle. Other tools may not be strong enough for the springs
on this vehicle and you could be injured if you do not use Special Tool CH-48845. Failure to do so could result in serious personal injury.
Note: Use only hand tools to perform the following service procedure.
1. Install the front shock absorber assembly in the CH-48845 .
Note: For vehicles equipped with electronic suspension control, ensure that the upper retaining bracket of the CH-48845 is adjusted properly so
that it DOES NOT damage the front suspension mount.
2. Position the shock absorber (2) in the upper retaining bracket of the CH-48845 (1) so the shock absorber will be centered.