Silverado 2500 2WD V8-6.0L (2007)
2. Install the HO2S (1).
Tighten the sensor to 42 N.m (31 lb ft).
3. Connect the HO2S (1) electrical connector to the engine wiring harness electrical connector (2).
4. Install the CPA retainer (3).
5. Install the front propeller shaft to the front differential, if equipped with 4WD.
Heated Oxygen Sensor Replacement - Bank 1 Sensor 2 (2500 Series)
Heated Oxygen Sensor Replacement - Bank 1 Sensor 2 (2500 Series)
Removal Procedure
Notice: Refer to Heated Oxygen and Oxygen Sensor Notice.