Silverado 2500 2WD V8-6.0L VIN U (2004)
Power Seat Switch: Removal and Replacement
Seat Switch Replacement - Power
Removal Procedure
1. Remove the power seat switch bezel from the seat.
2. Remove the power seat switch to bezel screws.
3. Remove the power seat switch.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the power seat switch to bezel screws.
Tighten the screws to 2 N.m (18 lb in).
2. Install the power seat switch bezel to the seat.
