Silverado 2500 2WD V8-6.0L VIN U (2004)
9. Remove the backing plate nuts.
10. Remove the backing plate from the axle housing flange.
Installation Procedure
1. Install the backing plate to the axle housing flange.
2. Notice:
Refer to Fastener Notice in Service Precautions.
Install the backing plate nuts.
^
Tighten the backing plate bolts to 135 Nm (100 ft. lbs.).
3. Install the park brake shoe.
4. Install the axle shaft.
5. Adjust the park brake shoe. Refer to Park Brake Adjustment.
6. Install the rotor.