Silverado 2500 2WD V8-6.0L VIN U (2004)
![background image](/chevrolet/silverado_2500_2wd/v8-6.0l_vin_u/Page-6018.png)
switch lighting connector.
3.3.
Undo the floor console's retaining bolts (C).
3.4.
Take out the rear ashtray/cover (D).
3.5.
Remove the screw (E) for the rear cover.
3.6.
Remove the floor console's retaining nuts (E).
3.7.
Detach the floor console (G) by pulling it straight back and lifting it slightly.
3.8.
If required, detach the switch for the rear seat heater and unplug the connector.
4.
Remove the switch and the floor console:
4.1.
Detach the window lift module (A) by loosening it in the front edge (snap fastener). Unplug the window lift module's connector.
4.2.
Detach the switch for the roof lighting (B) and unplug its connector. Lift away the floor console.
5.
Pry out the signal line from the SRS control module to the OnStar(R) control module and secure it:
5.1.
Unplug the SRS control module's connector (A).