Silverado 2500 2WD V8-6.0L VIN U (2004)
3. Install the O-ring (7) to the steering knuckle, 25/35 series.
4. Notice:
Refer to Fastener Notice in Service Precautions.
Install the wheel speed sensor mounting bolt.
^
Tighten the bolt to 18 Nm (13 ft. lbs.).
5. Install the wheel hub and bearing and splash shield to the vehicle, 25/35 series.
6. Install the wheel hub and bearing (4) and splash shield to the 15-series steering knuckle.
7. Install the wheel hub and the 15-series bearing mounting bolts.Install the wheel hub and bearing mounting bolts, the 25/35 series.
^
Tighten the bolts to 180 Nm (133 ft. lbs.).
8. Install the wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle.
^
Tighten the brake hose clip bolt to 12 Nm (106 inch lbs.).
9. Install the rotor. Refer to Brake Rotor Replacement - Front.
10. Install the tire and wheel.
11. Lower the vehicle.
