Silverado 2500 2WD V8-8.1L VIN G (2005)
Rear Door Panel: Service and Repair
Panel Replacement
Trim Panel Replacement - Side Access Door
Trim Panel Replacement - Side Access Door
Removal Procedure
1. Remove the door handle bezel.
2. Remove the screws that retain the trim panel armrest.
3. Insert a flat-bladed tool between the trim panel and the door in order to carefully pry the panel from the door.
Installation Procedure
1. Install the trim panel to the door by pressing the panel edges until the panel is in place.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the screws that retain the trim panel armrest.