Silverado 2500 2WD V8-8.1L VIN G (2005)
Rear Door Striker: Service and Repair
Striker Replacement - Upper
Striker Replacement - Upper
Removal Procedure
1. Open the side access door.
2. Remove the upper door striker bolts.
3. Remove the upper door striker from the vehicle.
Installation Procedure
1. Install the upper door striker to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the upper door striker bolts.
Tighten the upper door striker bolts to 24 N.m (18 lb ft).
3. Close the door and inspect for proper operation.