Silverado 2500 2WD V8-8.1L VIN G (2005)
Sun Visor: Removal and Replacement
Sunshade Replacement
Removal Procedure
1. Remove the screws.
2. Disconnect the electrical connector, if equipped.
3. Remove the sunshade.
Installation Procedure
1. Connect the electrical connector, if equipped.
2. Install the sunshade.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the sunshade screws.
Tighten the screw to 2 N.m (18 lb in).