Silverado 2500 2WD V8-8.1L VIN G (2005)
11. Remove the brake caliper bracket bolts.
12. Caution: Do not depress the brake pedal with the brake rotors/calipers and/or the brake drums removed. Damage to the brake system
may result. If brake system damage occurs and is not repaired, vehicle damage and/or personal injury or death may result.
Remove the caliper and caliper bracket as an assembly.
13. Remove the brake caliper bolts.
14. Remove the caliper from the caliper bracket.
15. Inspect the caliper.
16. Remove the brake pads from the caliper bracket.
17. Remove the anti-rattle clips.
18. Inspect the caliper bracket for cracks and/or damage. Replace if necessary.
19. Inspect the caliper bracket bushings for damage and/or wear. Replace the bushings if necessary.
20. Perform the following procedure to replace the brake caliper bracket bushings.
1. Insert a flat-bladed tool between the bushing flange and the bracket.
2. Work the tool around the bushing flange and remove the bushing from the bracket.
3. Place a socket over the boot onto the bushing flange and install the bushing to the bracket.
Installation Procedure
