Silverado 2500 2WD V8-8.1L VIN G (2005)
8. For all 15 series vehicles, pull down on the park brake cable in front of the equalizer and install the left park brake cable to the equalizer bar.
9. Remove the safety stands.
10. Remove the safety stands and lower the vehicle.
11. Adjust the park brake cable.
w/Rear Disc and w/RPO NYS
Park Brake Cable Replacement - Left Rear (w/Rear Disc and w/RPO NYS)
Removal Procedure
1. Release the park brake.
2. Raise and support the vehicle.
3. Relieve the tension from the park brake cable by pulling down on the park brake cable in front of the equalizer and removing the left park brake
cable from the equalizer bar.