Silverado 2500 2WD V8-8.1L VIN G (2005)
26. Remove the intake manifold.
27. Important: The intake manifold gaskets are not reusable.
Remove and discard the intake manifold side gaskets.
28. Remove and discard the intake manifold end seals.
29. Important: The splash shield is secured using a snap-in fit. Do not distort the splash shield. The splash shield is reusable.
Remove the splash shield.
30. If replacing the intake manifold, refer to Intake Manifold Disassemble.
31. Clean and inspect the intake manifold.
Installation Procedure
