Silverado 2500 2WD V8-8.1L VIN G (2005)
4. Connect the throttle actuator motor electrical connector (5).
5. Install the intake air resonator.
6. Connect a scan tool in order to test for proper throttle-opening and throttle-closing range.
7. Operate the accelerator pedal and monitor the throttle angles. The accelerator pedal should operate freely, without binding, between a closed
throttle, and a wide open throttle (WOT).
8. Verify that the vehicle meets the following conditions:
-
The vehicle is not in a reduced engine power mode.
-
The ignition is ON.
-
The ignition is OFF.