Silverado 2500 2WD V8-8.1L VIN G (2005)
Flywheel: Service and Repair
Engine Flywheel Replacement
Removal Procedure
1. If equipped with a automatic transmission, remove the transmission.
2. Remove the engine flywheel bolts.
3. Remove the engine flywheel.
4. If equipped with a manual transmission, remove the clutch assembly.
5. Remove the engine flywheel bolts.
6. Remove the engine flywheel.
7. Clean and inspect the engine flywheel.
Installation Procedure
Important: Make sure the flywheel is installed correctly. "Engine Side" is stamped on the flywheel to aid with installation.
1. If equipped with a manual transmission, Install the engine flywheel.