Silverado 2500 2WD V8-8.1L VIN G (2005)
1. Obtain a new shift solenoid D (1), shift solenoid E (4), TCC PWM solenoid (7), or modulated main pressure solenoid G. Install O-rings (2 and 3)
and lubricate with clean transmission fluid. Push the new solenoid into the control valve assembly (5) with the wiring harness connector in the
correct position.
2. Install the solenoid retainer (6). Connect the internal wiring harness to the solenoids replaced.
3. For a new shift solenoid C (5), install O-rings (3) and (4) and lubricate with clean transmission fluid. Push the new shift solenoid C (5) into the
control valve assembly with the wiring harness connector in the correct position. Install the solenoid retainer (2).
4. Install the oil pan and transmission internal oil filter. Refer to Oil Pan Replacement, See: Automatic Transmission/Transaxle/Fluid Pan/Service
and Repair