Silverado 2500 2WD V8-8.1L VIN G (2005)
7. Install the transmission fluid cooler hose from the Auxiliary oil cooler.
8. Install the grille assembly.
Vent Hose
Vent Hose
Removal Procedure
1. Remove the vent hose clip.
2. Remove the vent hose from the transmission vent.
Installation Procedure
1. Install the vent hose to the transmission.
2. Install the vent hose to the clip.
3. Notice: Refer to Fastener Notice in Service Precautions.
Install the bolt and the clamp.
^
Tighten the bolt to 10 Nm (89 inch lbs.).