Silverado 2500 2WD V8-8.1L VIN G (2005)
Transmission Cooler: Service and Repair
Allison
Transmission Fluid Cooler Connector Replacement
Removal Procedure
1. Disconnect the hose from the hydraulic connector assembly being replaced.
2. Remove the hydraulic connector assembly (1) and (2).
Installation Procedure
1. Notice: Refer to Fastener Notice in Service Precautions.
Install a new hydraulic connector assembly (1) and (2).
^
Tighten to 25 Nm (18 ft. lbs.).
2. Connect the hose to the hydraulic connectors.