Silverado 2500 2WD V8-8.1L VIN G (2005)
Transmission Housing Oil Seal Replacement - Rear
Transmission Housing Oil Seal Replacement - Rear (2WD)
^
Tools Required
-
J 8614-01 Pinion Flange Holder
-
J 6125-1BSlide Hammer
-
J 22834-A Rear Extension Housing Oil Seal Installer
-
J 23129 Universal Seal Remover
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Vehicle.
2. Remove the rear propeller shaft.
3. If required, remove the following:
1. The main shaft nut
2. The prop shaft yoke washer
3. The main shaft washer
4. The yoke
4. Remove the rear seal using J 6125-B (1) and J 23129 (2).
Installation Procedure