Silverado 2500 4WD V8-6.6L DSL Turbo (2010)
1. Install the turbocharger exhaust pipe into the clamp and position the pipe flat against the turbocharger.
2. Loosely install the turbocharger exhaust pipe to bracket bolt (1).
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Position the turbocharger exhaust pipe heat shield and install the heat shield bolts.
Tighten the bolts to 10 Nm (89 lb ft).