Silverado 3500 2WD V8-6.0L (2007)
Rear Brake Rotor Replacement (JH7)
Rear Brake Rotor Replacement (JH7)
Caution: Refer to Brake Dust Caution .
Notice: Any new rotor must have the protective coating removed from the friction surfaces before being placed in service. Remove the protective
coating using denatured alcohol or an equivalent brake cleaner, and wipe the surface clean with clean cloths. Do not use gasoline, kerosene, or other oil
base solvents which may leave an oily residue. This residue is damaging to the brake lining and is flammable.
Removal Procedure