Silverado 3500 2WD V8-6.0L (2007)
3. Position the park brake pedal assembly on the side panel.
Notice: Refer to Fastener Notice.
4. Install and finger tighten the mounting nuts.
Tighten the nuts to 25 N.m (18 lb ft).
5. Connect the park brake warning lamp connection.
6. Install the park brake release handle to the instrument panel.
7. Install the park brake release handle bolt.
Tighten the bolt to 9 N.m (80 lb in).
8. Install the hinge pillar trim panel.
9. Install the left side instrument panel electrical center/junction block.
10. Raise the vehicle.