Silverado 3500 2WD V8-6.0L (2007)
6. Install the CMP sensor (703).
7. Position the CMP sensor wire harness (737) to the front cover
8. Connect the CMP sensor wire harness to the CMP sensor.
9. Install the CMP sensor wire harness bolts (738).
Tighten the bolts to 12 N.m (106 lb in).
10. Apply a 5 mm (0.20 in) bead of sealant, 20 mm (0.80 in) long to the oil pan to engine block junction. Refer to Sealers, Adhesives, and
Lubricants.
11. Position the NEW engine front cover gasket (503) and front cover (502) to the engine.
12. Install the front cover bolts (501) until snug. Do not overtighten.
