Silverado 3500 2WD V8-6.0L (2007)
Important: Do not reuse the old idler arm nut.
4. Install the new idler arm nut (3) to the idler arm (1).
Tighten the nut to 62 N.m (46 lb ft).
5. Install the engine shield, if equipped.
6. Adjust the front toe.
Important: Do not reuse the old idler arm nut.
4. Install the new idler arm nut (3) to the idler arm (1).
Tighten the nut to 62 N.m (46 lb ft).
5. Install the engine shield, if equipped.
6. Adjust the front toe.