Silverado 3500 4WD V8-6.0L VIN U (2004)
Clutch Pedal Assembly: Service and Repair
Clutch Pedal Replacement
Removal Procedure
1. Remove the driver's side knee bolster and deflector.
2. Disconnect and reposition the junction block.
3. Disconnect the clutch pedal position switch electrical connector (1).
4. Push the clutch pedal in and squeeze the pushrod bushing tabs in, in order to release the pushrod bushing from the clutch pedal.
5. If equipped with a NV 3500 or NV 4500 transmission, disconnect the clutch master cylinder to clutch actuator cylinder quick connect fitting.
6. Remove the clutch master cylinder clip from the brake pressure module valve pipe.
7. If equipped with a ZF S6-650 transmission, disconnect the clutch master cylinder to clutch actuator cylinder quick connect fitting.