Silverado 3500 4WD V8-6.6L DSL Turbo VIN 2 (2004)
9. Important: The crankshaft reluctor and the oil pump drive gear are timed together at the factory. Do not remove the crankshaft reluctor from the
oil pump drive gear.
Remove the oil pump drive gear and crankshaft reluctor.
^
Do not remove the crankshaft reluctor bolts.
^
Do not damage the reluctor teeth.
10. Using J 26900-12 (1) and J 26900-13 (2), measure the camshaft end play.
^
The production value is 0.050-0.114 mm (0.002-0.0045 inch) and service limit is 0.20 mm (0.008 inch).
^
Replace the camshaft gear or the camshaft thrust plate if measured value exceeds service limit.
11. Remove the camshaft reluctor screws.
12. Remove the camshaft reluctor.
