Silverado 3500 4WD V8-8.1L VIN G (2006)
1. Install the radiator.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the radiator bolts.
^
Tighten the bolts to 25 Nm (18 ft. lbs.).
3. Connect the transmission oil cooler lines to the radiator, if necessary .
4. Connect the engine oil cooler lines to the radiator, if necessary.
5. Install the surge tank inlet hose to the radiator.
6. Reposition the surge tank inlet hose clamp at the radiator.
7. Install the air cleaner adapter (2) to the vehicle.
8. Install the bolts to the air cleaner adapter (2).
^
Tighten the bolts to 9 Nm (80 inch lbs.).
9. Install the push pin to the air cleaner adapter (2).
10. Install the air cleaner assembly.
11. Install the lower fan shroud.
12. Install the radiator outlet hose for the 8.1L engine.
13. Install the radiator inlet hose for the 8.1L engine.
