Silverado 3500 4WD V8-8.1L VIN G (2006)
4. Loosely install the bolts.
5. Tighten the exhaust pipe bolts in the sequence shown.
Tighten the bolts to 53 Nm (39 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the exhaust pipe heat shield bolts.
Tighten the bolts to 8 Nm (71 inch lbs.).
7. Install the left side exhaust heat shield (3) at the dash panel.
8. Install the heat shield nuts (2).
Tighten the nuts to 9 Nm (80 inch lbs.).
9. Install the right wheelhouse panel.
Right
