Silverado 3500 4WD V8-8.1L VIN G (2006)
1. Position the exhaust pipe with a NEW gasket to the turbocharger. Align the tab on the gasket at the turbocharger to face inward.
2. Loosely install the bolts.
3. Position the exhaust pipe with a NEW gasket to the exhaust manifold. Align the tab on the gasket to face outward.
4. Loosely install the bolts.
5. Tighten the exhaust pipe bolts in the proper sequence.
Tighten the bolts to 53 Nm (39 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
6. Remove the turbocharger exhaust pipe.
