Silverado 3500 4WD V8-8.1L VIN G (2006)
steps necessary to be sure the recall correction has been made before selling or releasing the vehicle.
Disclaimer
Service Procedure
Important:
The service procedure contained in this recall is different from the service procedure found in the appropriate service manual. As a result, the
labor time allowance has been revised to correspond with this new service procedure.
Service Procedure - Light Duty Trucks (Silverado, Suburban, Avalanche, Sierra, Yukon XL)
1.
Unsnap the intake manifold sight shield from the stud.
2.
Remove the sight shield from the sight shield bracket.
Caution:
Relieve the fuel system pressure before servicing fuel system components in order to reduce the risk of fire and personal injury. After relieving
the system pressure, a small amount of fuel may be released when servicing the fuel lines or connections. In order to reduce the chance of
personal injury, cover the regulator and the fuel line fittings with a shop towel before disconnecting. This will catch any fuel that may leak out.
Place the towel in an approved container when the disconnection is complete.
J 34730-1A Fuel Pressure Gage
