Silverado 3500 4WD V8-8.1L VIN G (2006)
Negative: Service and Repair
Battery Negative Cable Disconnect/Connect Procedure (Single Battery)
BATTERY NEGATIVE CABLE DISCONNECT/CONNECT PROCEDURE (SINGLE BATTERY)
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Record the customer's pre-set radio stations.
2. Turn off all the lamps and accessories.
3. Turn the ignition OFF.
4. Loosen the negative battery cable bolt.
5. Remove the negative battery cable.
INSTALLATION PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and battery cable end.
1. Install the negative battery cable.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Tighten the negative battery cable bolt.
Tighten the bolt to 17 N.m (13 lb ft).
3. Re-set the customer's radio stations.
