Silverado 3500 4WD V8-8.1L VIN G (2006)
29. Remove the I/P carrier bolts. The left side is shown, the right side is similar.
30. Allow the instrument panel carrier to move rearward enough to gain access for the clutch pedal assembly removal.
31. Remove the clutch pedal sub-assembly.
Installation Procedure
1. Install the clutch pedal sub-assembly.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners
requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use
paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint
clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid
damage to parts and systems.
