Silverado 3500 4WD V8-8.1L VIN G (2006)
Speed Sensor: Service and Repair
NVG 263-NP1 - Transfer Case
Transfer Case Speed Sensor Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Disconnect the speed sensor electrical connector.
3. Remove the speed sensor.
Installation Procedure
1. Install the speed sensor.
^
Tighten the sensor to 15 Nm (11 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.