Silverado Classic 1500 2WD V6-4.3L (2007)
Idler Pulley: Service and Repair
Drive Belt Idler Pulley Replacement - Right Side
Drive Belt Idler Pulley Replacement - Right Side
Removal Procedure
1. Loosen the idler pulley bolt.
2. Remove the drive belt.
Installation Procedure
1. Install the idler pulley.
2. Install the idler pulley bolt until snug.
3. Install the drive belt.
Notice: Refer to Fastener Notice in Service Precautions.
4. Tighten the idler pulley bolt.
Tighten the bolt to 50 Nm (37 ft. lbs.).
