Silverado Classic 1500 2WD V6-4.3L (2007)
35. Connect the following electrical connectors:
^
The A/C compressor clutch (1), if equipped
^
The A/C pressure switch (4), if equipped
36. Install the engine wiring harness clip (3) to the accelerator control cable bracket.
37. Install the accelerator cable to the accelerator control cable bracket.
38. Install the accelerator cable to the throttle body lever.
39. Install the cruise control cable to the accelerator control cable bracket, if equipped.
40. Connect the cruise control cable to the throttle lever, if equipped.
41. Install the fuel pipes/hoses.
