Workshop Repair Manuals

Chevrolet Workshop Manuals

[PREV PAGE] [NEXT PAGE]

chevrolet Workshop Repair Guides


Silverado Classic 1500 4WD V8-4.8L (2007)

Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Relay > Component Information > Service and Repair > Relay Replacement (Attached to Wire Harness)

Page 1
background image

Power Distribution Relay: Service and Repair
Relay Replacement (Attached to Wire Harness)

RELAY REPLACEMENT (ATTACHED TO WIRE HARNESS)

REMOVAL PROCEDURE

1. Locate the relay.
2. Remove any fasteners which hold the relay in place.
3. Remove any connector position assurance (CPA) devices or secondary locks.
4. IMPORTANT:  Use care when removing a relay in a wiring harness when the relay is secured by fasteners or tape.

Separate the relay (1) from the wire harness connector (2).

INSTALLATION PROCEDURE

1. Connect the relay (1) to the wire harness connector (2).
2. Install any connector position assurance (CPA) devices or secondary locks.
3. Install the relay using any fasteners or tape that originally held the relay in place.

Relays and Modules > Relays and Modules - Power and Ground Distribution > Power Distribution Relay > Component Information > Service and Repair > Relay Replacement (Attached to Wire Harness)

[PREV PAGE] [NEXT PAGE]