Silverado Classic 1500 4WD V8-4.8L (2007)
Install the sensor nut and position the sensor body parallel to the inside wheel surface while torquing.
Tighten the sensor nut to 7 Nm (62 inch lbs.).
5. Important:
Before installing the tire on the wheel, note the following items to avoid tire pressure sensor damage upon tire mounting:
^
Position the mounting/dismounting head 180 degrees from the valve stem.
^
Position the bead transition area 45 degrees counterclockwise of the valve stem.
^
Using the tire machine, rotate the tire/wheel assembly clockwise when transferring the tire bead to the inside of the wheel rim.
^
Repeat items for outer bead.
Install the tire on the wheel. Refer to Tire Mounting and Dismounting.
6. Install the tire/wheel assembly on the vehicle.
7. Lower the vehicle.
