chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Radio Front Speaker Replacement (Windshield Pillar Speaker)|Page 20080 > < Radio Front Speaker Replacement (Windshield Pillar Speaker)|Page 20078
Page 1
background image

Speaker: Service and Repair
Radio Front Floor Console Speaker Replacement (Subwoofer Speaker)

Radio Front Floor Console Speaker Replacement (Subwoofer Speaker)

Removal Procedure

1.  Remove the 2 front seats.
2.  Move the center console rearward slightly in order to disconnect the wire connector.

3.  Move the console rearward to gain access to the subwoofer speaker.
4.  Remove the 4 retaining bolts from the speaker.
5.  Disconnect the wire connector.
6.  Remove the speaker from the subwoofer assembly.

Installation Procedure

1.  Install the speaker into the subwoofer assembly.

2.  Connect the wire connector.

Notice:  Refer to Fastener Notice.

3.  Install the 4 retaining screws.

Ensure the screw follows the same thread in the screw boss so that a new thread is not formed.

Tighten the screws to 6 N.m (53 lb in).

Radio Front Speaker Replacement (Windshield Pillar Speaker)|Page 20080 > < Radio Front Speaker Replacement (Windshield Pillar Speaker)|Page 20078