chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Body Hinge Pillar Trim Panel Replacement|Page 21298 > < Body Hinge Pillar Trim Panel Replacement
Page 1
background image

Trim Panel: Service and Repair
Center Pillar Garnish Molding Replacement

Center Pillar Garnish Molding Replacement

Removal Procedure

1. Remove the door sill plates. Refer to  Front Side Door Sill Plate Replacement or  Rear Side Door Sill Plate Replacement .

2. Remove the pillar moldings by holding the moldings firmly while pulling out.

Installation Procedure

1. Install the pillar moldings by pushing until the molding locks into place.
2. Install the door sill trim plates. Refer to  Front Side Door Sill Plate Replacement or  Rear Side Door Sill Plate Replacement .

Body Hinge Pillar Trim Panel Replacement|Page 21298 > < Body Hinge Pillar Trim Panel Replacement