Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
Tailgate Latch: Service and Repair
Endgate Linkage Replacement
ENDGATE LINKAGE REPLACEMENT
REMOVAL PROCEDURE
1. Lower the endgate.
2. Loosen the endgate handle bolts. Refer to Endgate Handle Replacement.
3. Raise the endgate.
4. Remove the handle bezel by prying gently on the upper retainer tabs.
5. Lower and support the endgate.
6. Remove the endgate latch assembly.
7. Disengage the linkage rod from the latch assembly.
8. Remove the linkage rod (1) from the endgate handle assembly.
INSTALLATION PROCEDURE