Silverado Classic 1500 4WD V8-5.3L Hybrid (2007)
4. Important: If servicing just the brake pads, the brake hose does not have to be removed from the brake caliper.
Remove the guide pin bolt (1) from the brake caliper (2).
5. Rotate the brake caliper (2) upward until it stops or rest on the caliper mounting bracket (5), or use mechanics wire to support the brake caliper.
6. Important:
^
If removing the brake pads and shims to service other brake components, mark the position of the inner and outer pads and shims for the
proper installation.
^
DO NOT re-use the old brake pad shims with new brake pads. Replace with NEW only.
Remove the brake pads (3) and shims (4) from the mounting bracket (5).
7. Important: Perform the flowing service procedure only is replacing the brake pads.
Using the appropriate tool, SLOWLY compress the caliper piston into the bore.
Installation Procedure
