chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Seals and Gaskets, Engine > < Intake Manifold Replacement|Page 4742
Page 2
background image

2. Notice:  Use care when installing the engine sight shield to avoid contacting the manifold absolute pressure (MAP) sensor wire harness connector.

Loss of engine performance or engine damage may result.

Install the intake manifold sight shield to the retainer.
Tighten the bolt to 10 Nm (89 inch lbs.).

Seals and Gaskets, Engine > < Intake Manifold Replacement|Page 4742