chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Battery Disconnect Cut-Off Switch Replacement (5.3L Engine w/RPO HP2)|Page 5688 > < Battery Disconnect Cut-Off Switch Replacement (5.3L Engine w/RPO HP2)|Page 5686
Page 2
background image

4.  Remove the 120-volt cable connector screws.
5.  Disconnect the retainers securing the 120-volt cable to the generator battery carrier.

6.  Note the routing of the 120-volt cable.

7.  Remove the 120-volt cable (1) out through the receptacle opening (2) in the generator battery carrier.

Installation Procedure

Battery Disconnect Cut-Off Switch Replacement (5.3L Engine w/RPO HP2)|Page 5688 > < Battery Disconnect Cut-Off Switch Replacement (5.3L Engine w/RPO HP2)|Page 5686